| Sample Flow Rate | Range:50-150 ml/min; Accuracy:±20% ; Default: 75 ml/min |
| Principle of Operation | Non-dispersive infrared, dual wavelength, no moving parts |
| Initialization Time | Capnogram displayed in less than 4 seconds, at an ambient temperature of 25℃, full specifications within 2 mintues |
| CO2 measurement Range | 0-114 mmHg ; 0-15% ; 0-15.2 kPa |
| CO2 Response Time | Includes Transport time and rise time.Less than 2 seconds, at 150 ml/min sampling flow
Less than 3 seconds, at 100 ml/min sampling flow
Less than 4 seconds, at 50 ml/min sampling flow |
| CO2 Resolution | 0.2 mmHg @ 0-59 mmHg ; 0.5mmHg @60-114 mmHg |
| CO2 Accuracy | 0-40 mmHg ± 2 mmHg41-70 mmHg ± 5% of reading
71-100 mmHg ± 8% of reading
101-114 mmHg ±10% of reading
Above 80 reaths per mintue ±12% of reading
* Note:Gas temperature at 25℃ |
| CO2 Stability | Short Term Drift : Drift over three hours shall not exceed 1 mmHg maximumLong term Drift : Accuracy specification will be
maintained over a six hour period |
| CO2 Noise | RMS noise of the sensor shall be less than or equal to 0.5 mmHg at 5% CO2 |
| Sampling Rate | 100Hz |
| Respiration Rate Range | 2 to 150 breaths per minute |
| Respiration Rate Accuracy | ± 1 breath |
| Calibration | No Routine user calibration required |
| EtCO2 Calcuation | Method: peak of the expired CO2 waveform |
| Inspired CO2 Measurement | Method: Lowest reading of the CO2 waveform in the previous 20 seconds |
| Temperature | Operation : 0 to 40℃ ; Storage :-40 to 70℃ ; Transport :-40 to 70℃ |
| Humidity | Operation :10 to 90 % RH, Non-condensing ; Storage :10 to 90 % RH, Non-condensing.
Transport: 10 to 90 % RH, Non-condensing. |
| Atmospheric Perssure | Operating :400-800 mmHg ; Storage :400-800 mmHg ; Transport :400-800 mmHg |
| Water Resisitance | IPX4-Splash-Proof- sensor only |
| Voltage Requirements | 5 VDC ±5% ; Ripple not to exceed 100.0mV |
| Power Raing | < 1.2W Typical; < 2.0 W Warm-up |
| Sensor Weight | < 250 g |
| Sensor Size | Deep*Wide*High 102*62*38mm |
| Cable Length | 75cm |
